Mcedit

Keys

In addition to that, Shift combined with arrows does text highlighting (if supported by the terminal): Ctrl-Ins copies to the file
~/.mc/cedit/cooledit.clip, Shift-Ins pastes from ~/.mc/cedit/cooledit.clip, Shift-Del cuts to ~/.mc/cedit/cooledit.clip, and
Ctrl-Del deletes highlighted text. Mouse highlighting also works on some terminals. To use the standard mouse support provided by your terminal, hold
the Shift key. Please note that the mouse support in the terminal doesn’t share the clipboard with mcedit.

The completion key (usually Meta-Tab or Escape Tab) completes the word under the cursor using the words used earlier in the file.

To define a macro, press Ctrl-R and then type out the keys you want to be executed. Press Ctrl-R again when finished. You can then assign the
macro to any key you like by pressing that key. The macro is executed when you press Ctrl-A and then the assigned key. The macro is also executed if you
press Meta, Ctrl, or Esc and the assigned key, provided that the key is not used for any other function. The macro commands are stored in the file
~/.mc/cedit/cooledit.macros. Do NOT edit this file if you are going to use macros again in the same editing session, because mcedit caches macro
key defines in memory. mcedit now overwrites a macro if a macro with the same key already exists, so you won’t have to edit this file. You will also
have to restart other running editors for macros to take effect.

F19 will format C, C++, Java or HTML code when it is highlighted. An executable file called ~/.mc/cedit/edit.indent.rc will be created for you
from the default template. Feel free to edit it if you need.

C-p will run ispell on a block of text in a similar way. The script file will be called ~/.mc/cedit/edit.spell.rc.

If some keys don’t work, you can use Learn Keys in the Options menu.

Построители карт[]

Brush Tool

The brush tool allows you to «Paint» the world using preset shapes, you can use RFEG to Increase size, Decrease size, rotate and roll this tool. The varied version will randomly distribute the blocks you select based on selected weightings.

Line Brush

Hold Z after placing a brush and click a second point to create a solid line of that brush. Line spacing adjusts how close together brushes are.

The line tool works from the last brushed point, so you can continue from the end of your last line.

Erode

You can also erode the terrain, making it more natural. To use this tool set the size and strength you want and click and drag over the area you wish to erode.

It is recommended to make multiple lower intensity passes for best results. If the brush is still too strong at strength 1, turn up Minimum Spacing.

Flood Fill

This brush will systematically replace all blocks of the same type touching the block you click on. This will go on until you either cancel the operation or it finishes.

The paste brush simply brushes an imported schematic.

Replace and Varied Replace

The replace and varied replace tools replace the block selected in the first slot with the block(s) selected in the lower slot(s).

Import tool:

The import tool lets you import blocks from different sources: It can place blocks previously saved using the select tool to a schematic.
It can also import an entire level into another level. It will ask you to choose a level or schematic. After you’ve chosen,
the level or schematic will appear in the green box. Although it may take a few seconds to display the
contents of the import, it is fully loaded and can be placed without waiting for everything to render.

As before, you can click to pick the blocks up, and use E R F to rotate, roll, and flip them.

Press ENTER or click Import to construct. Constructions of up to 64 million blocks should take less than a minute. The copy is done once you regain control. You should press Control-S to save your level now. The lighting recalculation for this city took about 3 minutes on a Core i5.

OPTIONS

Options~/.config/mc/ini

use_internal_edit

This option is ignored when invoking
mcedit.

editor_tab_spacing

Interpret the tab character as being of this length.
Default is 8. You should avoid using
other than 8 since most other editors and text viewers
assume a tab spacing of 8. Use
editor_fake_half_tabs

to simulate a smaller tab spacing.

editor_fill_tabs_with_spaces

Never insert a tab character. Rather insert spaces (ascii 32) to fill to the
desired tab size.

editor_return_does_auto_indent

Pressing return will tab across to match the indentation
of the first line above that has text on it.

editor_backspace_through_tabs

Make a single backspace delete all the space to the left
margin if there is no text between the cursor and the left
margin.

editor_fake_half_tabs

This will emulate a half tab for those who want to program
with a tab spacing of 4, but do not want the tab size changed
from 8 (so that the code will be formatted the same when displayed
by other programs). When editing between text and the left
margin, moving and tabbing will be as though a tab space were
4, while actually using spaces and normal tabs for an optimal fill.
When editing anywhere else, a normal tab is inserted.

editor_option_save_mode

Possible values 0, 1 and 2. The save mode (see the options menu also)
allows you to change the method of saving a file. Quick save (0) saves
the file immediately, truncating the disk file to zero length (i.e.
erasing it) and then writing the editor contents to the file. This
method is fast, but dangerous, since a system error during a file save
will leave the file only partially written, possibly rendering the data
irretrievable. When saving, the safe save (1) option enables creation
of a temporary file into which the file contents are first written. In
the event of a problem, the original file is untouched. When the
temporary file is successfully written, it is renamed to the name of the
original file, thus replacing it. The safest method is create backups
(2): a backup file is created before any changes are made. You
can specify your own backup file extension in the dialog. Note that
saving twice will replace your backup as well as your original file.

editor_word_wrap_line_length

Line length to wrap at. Default is 72.

editor_backup_extension

Symbol to add to name of backup files. Default is «~».

editor_line_state

Show state line of editor. Currently it shows current line number (in the future
it might show things like folding, breakpoints, etc.). M-n toggles this option.

editor_visible_spaces

Toggle «show visible trailing spaces». If editor_visible_spaces=1, they are shown
as ‘.’

editor_visible_tabs

Toggle «show visible tabs». If editor_visible_tabs=1, tabs are shown as ‘<—->’

editor_persistent_selections

Do not remove block selection after cursor movement.

editor_cursor_beyond_eol

Allow moving cursor beyond the end of line.

editor_cursor_after_inserted_block

Allow moving cursor after inserted block.

editor_syntax_highlighting

enable syntax highlighting.

editor_edit_confirm_save

Show confirmation dialog on save.

editor_option_typewriter_wrap

to be described

editor_option_auto_para_formatting

to be described

editor_option_save_position

save file position on exit.

source_codepage

symbol representation of codepage name for file (i.e. CP1251, ~ — default).

editor_group_undo

do UNDO for several of the same type of action (inserting/overwriting,
deleting, navigating, typing)

editor_wordcompletion_collect_entire_file

Search autocomplete candidates in entire of file or just from
begin of file to cursor position (0)

spell_language

Spelling language (en, en-variant_0, ru, etc) installed with aspell
package (a full list can be get using ‘aspell’ utility).
Use
spell_language = NONE

to disable aspell support. Default value is ‘en’. Option must located
in the section.

Chunk tool:

When you pick the Chunk tool, the visible selection is
automatically expanded to cover all of the chunks it touches. Press Create to create all missing chunks in the selection, ignoring any chunks already present.
Press Destroy to remove any chunks within the selection. Use Prune to keep all of the chunks in the selection, and delete the ones outside.
Use Repop to mark chunks for repopulation of ores and structures next time minecraft loads the chunk.
All of these will ask you for confirmation because there’s no way to undo them. Use TAB to get a better view for chunk pruning.

Finally, you can press Relight to fix any bad lighting within the selected chunks. If other programs leave your level full of black spots, you can fix it with this.

Options

Options~/.mc/ini

use_internal_edit

This option is ignored when invoking mcedit.

editor_tab_spacing

Interpret the tab character as being of this length. Default is 8. You should avoid using other than 8 since most other editors and text viewers assume a
tab spacing of 8. Use editor_fake_half_tabs to simulate a smaller tab spacing.

editor_fill_tabs_with_spaces

Never insert a tab space. Rather insert spaces (ascii 20h) to fill to the desired tab size.

editor_return_does_auto_indent

Pressing return will tab across to match the indentation of the first line above that has text on it.

editor_backspace_through_tabs

Make a single backspace delete all the space to the left margin if there is no text between the cursor and the left margin.

editor_fake_half_tabs

This will emulate a half tab for those who want to program with a tab spacing of 4, but do not want the tab size changed from 8 (so that the code will be
formatted the same when displayed by other programs). When editing between text and the left margin, moving and tabbing will be as though a tab space were 4,
while actually using spaces and normal tabs for an optimal fill. When editing anywhere else, a normal tab is inserted.

editor_option_save_mode

Possible values 0, 1 and 2. The save mode (see the options menu also) allows you to change the method of saving a file. Quick save (0) saves the file by
immediately, truncating the disk file to zero length (i.e. erasing it) and the writing the editor contents to the file. This method is fast, but dangerous,
since a system error during a file save will leave the file only partially written, possibly rendering the data irretrievable. When saving, the safe save
(1) option enables creation of a temporary file into which the file contents are first written. In the event of an problem, the original file is untouched.
When the temporary file is successfully written, it is renamed to the name of the original file, thus replacing it. The safest method is create backups
(2). Where a backup file is created before any changes are made. You can specify your own backup file extension in the dialog. Note that saving twice will
replace your backup as well as your original file.

editor_word_wrap_line_length

line length to wrap. 72 default.

editor_backup_extension

symbol for add extension to name of backup files. Default «~».

editor_line_state

show state line of editor now it show number of file line (in future it can show things like folding, breakpoints, etc.). M-n toglle this option.

editor_visible_spaces

Toggle show visible trailing spaces (TWS), if editor_visible_spaces=1 TWS showed as ‘.’

editor_visible_tabs

Toggle show visible tabs, if editor_visible_tabs=1 tabs showed as ‘<—->’

editor_persistent_selections

Do not remove block selection after moving the cursor.

editor_cursor_beyond_eol

Allow moving cursor beyond the end of line.

editor_syntax_highlighting

enable syntax highlighting.

editor_edit_confirm_save

show confirm dialog on save.

editor_option_typewriter_wrap

to be described

editor_option_auto_para_formatting

to be described

editor_option_save_position

save file position on exit.

source_codepage

symbol representation of codepage name for file (i.e. CP1251, ~ — default).

editor_wordcompletion_collect_entire_file

Search autocomplete candidates in entire of file or just from begin of file to cursor position (0)

Команды[]

• Selection: Выделите область мышкой по диагонали. Нажмите ещё раз, чтобы менять масштаб, длину, высоту. Вы можете удалить блоки или экспортировать их для файла схемы.
• Brush: Нажмите, чтобы заполнить выделенную область блоками. Выберите размер кисти, форму и тип блока.
• Clone: Копирует выделенные блоки. Клавиши ERF для трансформации блоков.
• Fill: Позволяет заменить блоки в выделенной области.
• Filter: Используйте один из стандартных фильтров для сглаживания местности или изменения верхнего слоя почвы, или создайте свой собственный фильтр/ плагин используя Python.
• Crane: Импорт файла схемы или целый уровень.
• Player: Нажмите, чтобы переместить персонажа. Нажмите дважды, чтобы телепортироваться.
• Spawn: Нажмите, чтобы переместить персонажа на точку спауна. Не доступен на пустом уровне. Нажмите дважды, чтобы телепортироваться.
• Chunk: Та же самая операция, как в выделении, только это функция с целыми чанками.

Ваши личные схемы хранятся в папке «Документы», в папке с именем «MCEdit-schematics». Это ваши рабочие копии, по умолчанию включены стандартные схемы MCEdit. Ваши личные настройки для MCEdit хранятся в папке «Документы», в «mcedit.ini» файле.

Удерживая левую кнопку мыши, используйте кнопки перемещения (по умолчанию: WASDQZ) для перемещения соответствующего объекта вокруг. Удерживайте ⇧ Shift, чтобы изменить расстояние.

Если у вас мощный компьютер, нажмите Ctrl + F, и дальность прорисовки увеличится.

FILES

/usr/share/mc/mc.hlp

The help file for the program.

/usr/share/mc/mc.ini

The default system-wide setup for GNU Midnight Commander, used only if
the user’s own ~/.config/mc/ini file is missing.

/usr/share/mc/mc.lib

Global settings for the Midnight Commander. Settings in this file
affect all users, whether they have ~/.config/mc/ini or not.

/usr/share/mc/syntax/*

The default system-wide syntax files for mcedit, used only if
the corresponding user’s own ~/.local/share/mc/mcedit/ file is missing.

~/.config/mc/ini

User’s own setup. If this file is present then the setup is loaded
from here instead of the system-wide setup file.

~/.local/share/mc/mcedit/

Map Viewers[]

Map viewers are read-only and have an interactive interface.

MACRO

To define a macro, press
Ctrl-R
and then type out the keys you want to be executed. Press
Ctrl-R
again when finished. The macro can be assigned to any key by pressing that key.
The macro is executed when you press the assigned key.

The macro commands are stored in section

it the file
~/.local/share/mc/mc.macros.

External scripts (filters) can be assigned into the any hotkey by edit
mc.macros
like following:

ctrl-W=ExecuteScript:25;

This means that ctrl-W hotkey initiates the
ExecuteScript(25)
action, then editor handler translates this into execution of
~/.local/share/mc/mcedit/macros.d/macro.25.sh
shell script.

External scripts are stored in
~/.local/share/mc/mcedit/macros.d/
directory and must be named as
macro.XXXX.sh
where
XXXX
is the number from 0 to 9999.
See
Edit Menu File
for more detail about format of the script.

Following macro definition and directives can be used:

#silent

If this directive is set, then script starts without interactive subshell.

%c

The cursor column position number.

%i

The indent of blank space, equal the cursor column.

%y

The syntax type of current file.

%b

The block file name.

%f

The current file name.

%n

Only the current file name without extension.

%x

The extension of current file name.

%d

The current directory name.

%F

The current file in the unselected panel.

%D

The directory name of the unselected panel.

%t

The currently tagged files.

%T

The tagged files in the unselected panel.

%u and %U

Similar to the
%t
and
%T
macros, but in addition the files are untagged. You can use this macro
only once per menu file entry or extension file entry, because next time
there will be no tagged files.

%s and %S

The selected files: The tagged files if there are any. Otherwise the
current file.

Feel free to edit this files, if you need.
Here is a sample external script:

l       comment selection
        TMPFILE=`mktemp ${MC_TMPDIR:-/tmp}/up.XXXXXX` || exit 1
        echo #if 0 > $TMPFILE
        cat %b >> $TMPFILE
        echo #endif >> $TMPFILE
        cat $TMPFILE > %b
        rm -f $TMPFILE

Map Editors[]

Map editors alter an existing level’s terrain or other properties, such as player position and time of day. Some of them also let you edit your inventory and generate terrain.

KEYS

In addition to that, Shift combined with arrows does text highlighting
(if supported by the terminal):
Ctrl-Ins

copies to the file
~/.cache/mc/mcedit/mcedit.clip,

Shift-Ins

pastes from
~/.cache/mc/mcedit/mcedit.clip,

Shift-Del

cuts to
~/.cache/mc/mcedit/mcedit.clip,

and
Ctrl-Del

deletes highlighted text. Mouse highlighting also works on some
terminals. To use the standard mouse support provided by your terminal,
hold the Shift key. Please note that the mouse support in the terminal
doesn’t share the clipboard with
mcedit.

The completion key (usually
Meta-Tab

or
Escape Tab)

completes the word under the cursor using the words used in the file.

Miscellaneous

sscanfsprintfapplesoranges

Enter search string(%d,%d,%d)
Enter replace stringapples %d oranges %d
Enter replacement argument order3,2

It is advisable to use this feature with Prompt On Replace on, because a match is thought to be found whenever the number of arguments found matches the
number given, which is not always a real match. Scanf also treats whitespace as being elastic. Note that the scanf format %[ is very useful for scanning
strings, and whitespace.

The editor also displays non-us characters (160+). When editing binary files, you should set display bits to 7 bits in the Midnight Commander options
menu to keep the spacing clean.

FILES

/usr/share/mc/mc.hlp

The help file for the program.

/usr/share/mc/mc.ini

The default system-wide setup for GNU Midnight Commander, used only if
the user’s own ~/.config/mc/ini file is missing.

/usr/share/mc/mc.lib

Global settings for the Midnight Commander. Settings in this file
affect all users, whether they have ~/.config/mc/ini or not.

/usr/share/mc/syntax/*

The default system-wide syntax files for mcedit, used only if
the corresponding user’s own ~/.local/share/mc/mcedit/ file is missing.

~/.config/mc/ini

User’s own setup. If this file is present then the setup is loaded
from here instead of the system-wide setup file.

~/.local/share/mc/mcedit/

User’s own directory where block commands are processed and saved and
user’s own syntax files are located.

Running from source

Requirements

These programs and packages are required:

General

• git
• Python 2.7+ (Python 3 is unsupported)
• virtualenv (not strictly required, but highly recommended)

Python packages

• PyOpenGL 3.1.1a1
• PyOpenGL-accelerate 3.1.1a1
• numpy 1.15.0
• Pillow 5.2.0
• cython 0.28.4
• python-xlib 0.14
• ftputil 3.4 (Optional, but FTP server support will be disabled without it)
• pyClark (Optional, but error reporting will be disabled without it)

On Windows, these are also required (Either one works, pypiwin32 is recommended):

• pywin32
• pypiwin32

1. Clone repo

Clone the repo (recursively, to also clone submodules):

git clone --recursive https://github.com/Podshot/MCEdit-Unified

2. Install dependencies

On Linux, these may be installed at the system level with your distro package manager.

If they are not available, you can install them using . In this case, you should set up the virtualenv first, like this:

cd MCEdit-Unified  # Enter the repo directory
virtualenv virtualenv  # Create new virtualenv in "virtualenv" directory
source virtualenv/bin/activate  # Deactivate by running "deactivate" when done

Note about python-xlib: Some Linux distros do not have version 0.14 of python-xlib. In this case, you should install it with (either in a virtualenv, or after removing the system package).

Debian/Ubuntu

On Debian and Ubuntu, the Python packages may be installed from distro repositories like this:

sudo apt-get install python-opengl python-pygame python-yaml python-numpy python-xlib

The Python packages may be installed using .

Фильтры

Для применения фильтров необходимо выделить область воздействия.